Australia's Best Water Filter!

Regular tap water contains chlorine, heavy metals, and dangerous bacteria such as typhoid, cholera, bilharzia and amoebas.

Our Benchtop Water Filter 8 stage filtration system stands out from the rest, as it is specially designed to purify your drinking water to the optimum level. The 8 stages ensure your water is free of organic contaminants, lead and all bacteria, while also softening & stabilising its pH. Say goodbye to germs, rust, bacteria, and bad taste. With our filter, you get drinking water at its finest, all at a fraction of the cost of a bottled water addiction.

Fluoride Removal Filter 

• Activated Alumina (not aluminium) absorb the Fluoride up to 95% from Tap water 
• Replace and Restores: Natural trace minerals required by our bodies such as iron, zinc, magnesium, potassium, and iodine.
• Gradually releases these mineral substances.
• Removes the Rubbish: Rust and organic sediment particles and stops the propagation of bacteria.
• Removes Chlorine, pesticides, organic matter, heavy metals, iron, nickel, mercury and arsenic, bad smells and taste, bacteria, and parasites e.g., Giardia.
• Easy installation: Soak the Filter in water overnight, and wash under warm water (not boiling water) for 10 min till all black discharge comes out from the finest quality of charcoal.

Product Specifications:

16l Station Specification
Dimensions (cm): 33 (L) x 33 (W) x 50 (H)
Net Weight:  3.5 KG
Gross Weight:  4.0KG
Water Flow:0.3L/min
Hard Plastic Material:  BPA free

20l Station Specification
Dimensions (cm): 33 (L) x 33 (W) x 59 (H)
Net Weight:  3.5 KG
Gross Weight:  4.0KG
Water Flow:0.3L/min
Hard Plastic Material:  BPA free

• Please Note: We recommend changing your filter every 6 months (or 5000liter usage) depending on usage and water quality in your area. 
• Important Note: Never overfill the upper tank. If the lower tank is half full, you can completely fill the upper tank. If the level of water in the lower tank is higher than half, you must not fill the upper tank, or leakage may occur through the joining ring.

Feel Safe With A 14 Day Money Back Guarantee

Feel safe with a 14 Day Money Back Guarantee – We are Australia’s leading goods store, if the product arrives damaged, broken or out of shape, feel free to contact us within 14 days of arrival and receive a FULL REFUND no questions asked!

FAQ - Frequently Asked Questions

• How do I install the tap?

• The tap comes with 2 small rubber rings plus 1 plastic nut bolt. Place 1 ring on the tap, then place the tap into the tank (into the hole on the side of the lower tank). Now, place the second rubber ring from the inside of the tank around the tap. Finally, attach the nut bolt to the tap whilst making sure that the flat side of the nut bolt is sitting flush against the inside wall of the tank.

• How quick is the filtering of the water?

• The 8 stage process filtration is really quick to filter through. The 1st stage of the process, ceramic filtering, is the longest and filters about 1 Litre per hour. The main reason is that the ceramic filter consists of highly compressed ceramic diatom, which acts as a filter for dirt solids and dangerous bacteria such as typhoid, cholera, bilharzia and amoebas, among others.

• How to set up the water filter?

• It is recommended to soak all filters for about 24 hours and rinse thoroughly before setup and first use.

• Please follow the setup instructions to set up your filter. Parts should fit on top of each other and should be pretty straightforward to set up. Please make sure you tighten the tap connection and the seals are flush on the tank.